I'm designing a Circuit Board.. all the parts are SMD's
I've left placement room to solder, but some SMD's have no exterior placement of Solder
it's as if the parts are supposed to stick right to the board, so I'm thinking a baking technique must be at hand to place these on.. and coming from a desktop tinker.. I do Not have an over or the dexterity to over come hanging around inside of my home oven to minutely place this sumna-bitc#
the Part is a TCXO (3.2mm X 2.5mm) and has the placement contacts at the bottom...
unlike the SMD resistors & capacitors which are to their sides... the TCXO will be hard to work around and soder
ADVICE
first place the solder to the chip board, then.... what...?
I've left placement room to solder, but some SMD's have no exterior placement of Solder
it's as if the parts are supposed to stick right to the board, so I'm thinking a baking technique must be at hand to place these on.. and coming from a desktop tinker.. I do Not have an over or the dexterity to over come hanging around inside of my home oven to minutely place this sumna-bitc#
the Part is a TCXO (3.2mm X 2.5mm) and has the placement contacts at the bottom...
unlike the SMD resistors & capacitors which are to their sides... the TCXO will be hard to work around and soder
ADVICE
first place the solder to the chip board, then.... what...?
0 commentaires:
Enregistrer un commentaire